Lockwell Systems have a full range of passive fireproofing products from cable coating, jet fire coatings, firestops and steel coatings all specifically fire rated and approved by FM, UL, IEC and IEEE.
LOCKWELL CharCoat CC Designed as an Intumescent fire protection coating for electrical cables. It is a water-based latex coating for interior and exterior applications specially developed to stop re from spreading on single, grouped or bundled electrical cables.
With Lockwell CharCoat CC, electric cables exposed to cellulosic re with temperature of 750C is protected for 90 minutes but and also protects assets exposed to hydrocarbon res at 1100C for 15 minutes re rating at very low DFT compared to other coatings.
LOCKWELL CharCoat FS Panel Used to firestop mechanical and electrical services where they pass through fire rated walls. Firestop panels have a 4 hour re rating.
LOCKWELL CharCoat FS Mortar A specially formulated gypsum based mortar, which is mixed with water to be trowelled or poured around service penetrations with a 6hour re rating. Firestop Mortar is also provide structural stability on area applied.
LOCKWELL CharCoat FS Intu Sealant A 2 hour fire rated sealant suitable for sealing joints and service penetrations in fire walls, partitions, fire rated door frames and glazing systems. Firestop Intumescent sealant is widely used in combination of mortar and panel system.
LOCKWELL FireStop Pillow Best suited for areas with regular maintenance of pipes and cables that provides up to 4 hours fire protection. Pillows sized from 300mm x 50 x 35mm to 300mm x 200 x 35mm.
LOCKWELL FireStop Collars Provides a simple and effective method of fire stopping plastic pipework where it passes through compartment, walls and floor. With 4 hour fire rating, Lockwell FS Collars can be used for 55-250mm OD pipes and cables.
LOCKWELL CharCoat SC60/ SC12 Water based steel intumescent coating for fire protection of structural steelwork with a 60-minute and 120-minute fire rating for cellulosic fire.